Thickest part of the shaft?

[Raven]

Looking for measurements for:

Medium Nova
Medium Clayton
Large Chance
Mini Nocturne
Small Roland
Medium Cole
Medium and Large Ridley.

Sorry for the long list, but I'm not taking any chances buying these until I know they're the right size for me.

Already have a few of these here: https://docs.google.com/spreadsheets/d/ ... sp=sharing

[Raven]

Ah brilliant! Last time I checked that list it was quite small. You're doing everyone a favour by making that list. Thanks!

Yeah I pretty much spent most of my time since I made it adding things in.

[katze]

I found my tape measure, so I can do measurements of any of the toys in my profile.

[Rainbow Dasher]

Since I'm bored, I may clean out one of my toy drawers, bathe everyone inside, and then do photos and measurements. Hopefully, within a few hours, expect at least 5 - 10 toys measured/photoed.

[Raven]

No update for the list? Ha, I keep checking back everyday.

Yeah, measurements stopped coming in...I'll probably post the link somewhere again, so more people notice it.

[Raven]

The Measurements Sheet just got a Sticky in Community Help and FAQs
Now it will be so much easier to make it complete

[Raven]

No update for the list? Ha, I keep checking back everyday.

Oh, I noticed that you have a Medium Nox, could you possibly take measurements for me please?

usable length (pic if possible, since I can only take around 5.5 inch), circumference of head and bulge

Thank you

[Raven]

Can somebody please measure these for me?

Flint Mini
usable length, circumference on the bulge

Nocturne Mini
usable length with a pic; circumference of head, bulge and knot

Pretzal Small
usable length pic; circumference of upper and lower curve

[L_eather]

I'd certainly appreciate if someone could do the measurements for the royal dragon - I don't buy that the shaft is 5.5 circumference, ahhh.

Most of what I have is already measured, but here's a small Terra's measurements:
circumference of head: 3 inches
circumference of shaft: 5 inches
circumference of knot: 6 inches

[vixenvega]

► Show Spoiler

Large Blaze: 7.125" head, 7.25" usable length, 10" thickest point

XL Apollo: 10.5" head, 9" usable length

Large Sleipnir: 9.5" head, 10" usable length, 11.25" thickest point

[katze]

Can somebody please measure these for me?

Flint Mini
usable length, circumference on the bulge

Mini flint:

Usable length: a bit under 4 and a half inches
Circumference of bulge (third plate): about 5 and a half inches

[Raven]

Mini flint:

Usable length: a bit under 4 and a half inches
Circumference of bulge (third plate): about 5 and a half inches

Thank you

[ShiftingMist]

Posted over on the measurements for user forum too:

Can someone with a small and medium Nox give me an idea/comparison/confirmation of the measurements at the widest usable/bulge part of the toy (possibly with pics), please?

BD lists the medium's head circumference as 5.6 and the circumference of the shaft as 6.5. Its total length as 8.25. On the newly stickied measurements for users by users, the largest usable circumference of medium Nox has been listed as 8.25. This would put it well out of my range, and I'd need to step down to the small. In looking at the stickied measurements for the small, it seems it would better suit, but I'd like to have confirmation on the medium's measure before making a decision/purchase. Thanks.

I've got a medium pearce that I can measure if anyone needs.

[fluffy master]

Posted over on the measurements for user forum too:

Can someone with a small and medium Nox give me an idea/comparison/confirmation of the measurements at the widest usable/bulge part of the toy (possibly with pics), please?

BD lists the medium's head circumference as 5.6 and the circumference of the shaft as 6.5. Its total length as 8.25. On the newly stickied measurements for users by users, the largest usable circumference of medium Nox has been listed as 8.25. This would put it well out of my range, and I'd need to step down to the small. In looking at the stickied measurements for the small, it seems it would better suit, but I'd like to have confirmation on the medium's measure before making a decision/purchase. Thanks.

I've got a medium pearce that I can measure if anyone needs.

The 8.25 measurement is at the base. The bulge farther up the shaft is 6.5.

[ShiftingMist]

Posted over on the measurements for user forum too:

Can someone with a small and medium Nox give me an idea/comparison/confirmation of the measurements at the widest usable/bulge part of the toy (possibly with pics), please?

BD lists the medium's head circumference as 5.6 and the circumference of the shaft as 6.5. Its total length as 8.25. On the newly stickied measurements for users by users, the largest usable circumference of medium Nox has been listed as 8.25. This would put it well out of my range, and I'd need to step down to the small. In looking at the stickied measurements for the small, it seems it would better suit, but I'd like to have confirmation on the medium's measure before making a decision/purchase. Thanks.

I've got a medium pearce that I can measure if anyone needs.

The 8.25 measurement is at the base. The bulge farther up the shaft is 6.5.

Thank you for the confirmation. Medium Nox will be added to my wanted list for future purchases.

[CaramellowKangaroo]

Does anyone have a large Chance? Been getting no replies as of yet.... :(

What measurements did you want? I have a large unflared.

[CaramellowKangaroo]

Does anyone have a large Chance? Been getting no replies as of yet.... :(

What measurements did you want? I have a large unflared.

Could you please measure the head, the thinnest part, and the medial ring? I don't suppose you could add pictures too? Thank you so much.

Here goes!, Last picture is a bonus picture of my beautiful chance in all his glory. all in the spoiler~

► Show Spoiler

Widest head Circumference:
---------------------------

Thinnest part of Shaft Circumference:
---------------------------

Medial Ring Circumference:
---------------------------

Bonus: Base Circumference:
---------------------------

Bonus: Large Unflared Jester's Queen Then in all it's glory
---------------------------

[CaramellowKangaroo]

Oh wow! Thank you so much! I wonder how they pour Jester's Queen, it looks so clean.
I'm definitely getting a large in firm then! I'm waiting for Spectrum to return so I can nab a unicorn dick!

You're welcome! I wonder how they pour alot of them to be honest they are quite incredible with some of the colours and textures, I got mine in medium, it was a little hard to get in when I used it the first time but you get used to it after awhile, it really is an incredible toy. Feel free to send some pictures when you do get your unicorn! sounds great

[jrisner91]

Here's a Large Spritz the Seadragon!

Pictures:

► Show Spoiler

BD vs. Reality:

► Show Spoiler

Diameter of Head: 2.00 in. / 2.15 in.
Diameter of Shaft: 2.00 in. / 2.07 in.
Diameter of Knot: 3.00 in. / 3.03 in.
Usable Length: 9.00 in. / 9.50 in.*
Circumference of Head: 7.00 in. / 6.75 in.
Circumference of Shaft: 7.00 in. / 6.50 in.
Circumference of Knot: 9.50 in. / 9.50 in.
Total Length: 11.00 in. / 11.50 in.

*The actual usable length is a bit debatable... It measures 10" from the top of the base to tip of the head on the underside, but just barely over 9" on the topside.

[KinkyVampire69]

Measurements for the tip of a small anthro dragon anybody? Anything would help >w<