Blank Toy Templates: color away~! *UPDATED:09/28*

[Chibity]

https://www.mediafire.com/folder/xvz9k4rwk42vv/Jazzi'sTemplates

There are the templates I have created thus far!

Thanks for the newer models, Jazzi, very helpful!

[Jazzi the Pegasus]

https://www.mediafire.com/folder/xvz9k4rwk42vv/Jazzi'sTemplates

There are the templates I have created thus far!

You did such an amazing job so far ;O;

Thank you!

Thanks for the newer models, Jazzi, very helpful!

It's no problem. Still have a few more to go!

[Jazzi the Pegasus]

Have included Rowan in the main Template file on my MediaFire. Seperate link here-Click me!

[AmethystSnake]

Is there any template for Pretzal the Swamp Wyrm?

[Jazzi the Pegasus]

Is there any template for Pretzal the Swamp Wyrm?

It's in my template file.

[AmethystSnake]

Okay, thank you ! ^^

[Jazzi the Pegasus]

Updated my template folder (again) with Anthro Shark (Tabby) and Lily the Raptor!

[Kinky_Condesce]

I'm going to be dicking around with colors and templates n' stuff for a couple hours while I sit down with a nice drink.

If someone wants something done, quote me and give me a character/hex codes/theme/pic/whatever and a model (or two) and tell me if you want something that just looks cool, or something that could actually be implemented into a toy.

EDIT:
Yeah, havin fun with these.

[twinkle-little-bat]

not sure if this would be possible, but it's my dream toy . It's a bruiser the fusion, with a colour scheme based on charizard's X mega evolution. black base, with a metallic blue shaft, fading to a glow in the dark blue tip. with ribboning to look like lightning

I would certainly have some fun with this bad boy

[Niah]

I'm going to be dicking around with colors and templates n' stuff for a couple hours while I sit down with a nice drink.

If someone wants something done, quote me and give me a character/hex codes/theme/pic/whatever and a model (or two) and tell me if you want something that just looks cool, or something that could actually be implemented into a toy.

EDIT:
Yeah, havin fun with these.

Are you still up for this? I have an idea for a small Crackers in split firmness (soft shaft, firm base). I had an idea for a sort of forest or woodland type theme as a split marble design. I thought about a nice dark brown for the base (hex code 200D00), the primary color of the shaft be a dark forest green (hex code 051B00), and then the secondary color for the shaft be a metallic golden color (hex code 9C8308 or A28708). I just don't know how it would look. I don't want the gold to be too orange but I'm also not keen on it being too pale, but rather too pale than too orange. I made it up on the color page for Crackers as if I were ordering it and I quite like it. I'm pretty sure it's something they could do without too much trouble, but I've also read some horror stories of BD recently be rather off with the colors of people's customs. Thank you so very much in advance.

[Kinky_Condesce]

I'm going to be dicking around with colors and templates n' stuff for a couple hours while I sit down with a nice drink.

If someone wants something done, quote me and give me a character/hex codes/theme/pic/whatever and a model (or two) and tell me if you want something that just looks cool, or something that could actually be implemented into a toy.

EDIT:
Yeah, havin fun with these.

Are you still up for this? I have an idea for a small Crackers in split firmness (soft shaft, firm base). I had an idea for a sort of forest or woodland type theme as a split marble design. I thought about a nice dark brown for the base (hex code 200D00), the primary color of the shaft be a dark forest green (hex code 051B00), and then the secondary color for the shaft be a metallic golden color (hex code 9C8308 or A28708). I just don't know how it would look. I don't want the gold to be too orange but I'm also not keen on it being too pale, but rather too pale than too orange. I made it up on the color page for Crackers as if I were ordering it and I quite like it. I'm pretty sure it's something they could do without too much trouble, but I've also read some horror stories of BD recently be rather off with the colors of people's customs. Thank you so very much in advance.

Yeah!
I'll do it after dinner 38D

[Niah]

I'm going to be dicking around with colors and templates n' stuff for a couple hours while I sit down with a nice drink.

If someone wants something done, quote me and give me a character/hex codes/theme/pic/whatever and a model (or two) and tell me if you want something that just looks cool, or something that could actually be implemented into a toy.

EDIT:
Yeah, havin fun with these.

Are you still up for this? I have an idea for a small Crackers in split firmness (soft shaft, firm base). I had an idea for a sort of forest or woodland type theme as a split marble design. I thought about a nice dark brown for the base (hex code 200D00), the primary color of the shaft be a dark forest green (hex code 051B00), and then the secondary color for the shaft be a metallic golden color (hex code 9C8308 or A28708). I just don't know how it would look. I don't want the gold to be too orange but I'm also not keen on it being too pale, but rather too pale than too orange. I made it up on the color page for Crackers as if I were ordering it and I quite like it. I'm pretty sure it's something they could do without too much trouble, but I've also read some horror stories of BD recently be rather off with the colors of people's customs. Thank you so very much in advance.

Yeah!
I'll do it after dinner 38D

Oh sweet. Thank you so very much! I'm still deciding if I would just want them to do metallic for the yellow-gold or for all three colors (all my toys have some sort of metallic mixed in, so I rather like it). With Crackers having that matte printer texture all over, I'm worried he'd look too dull without a metallic effect to the whole toy (the ones I see on his page and on adopts look so dull without any bit of shiny added to them).

[Kinky_Condesce]

Oh sweet. Thank you so very much! I'm still deciding if I would just want them to do metallic for the yellow-gold or for all three colors (all my toys have some sort of metallic mixed in, so I rather like it). With Crackers having that matte printer texture all over, I'm worried he'd look too dull without a metallic effect to the whole toy (the ones I see on his page and on adopts look so dull without any bit of shiny added to them).

I had a pastel crackers that had a black base (it was split firmness too! and has a SC!) and a white shaft with purple marbled in and some metalic blue mixed in as a 3 way marble and it was LOVELY~ I'm not a big fan of metallics, but I think with the dark colors full metalics would be really nice! I was thinking that the gold would look good just being metallic itself, but after drawing this up i think full metalics would be nice!

Also sorry, my tablet drivers are all messed up and I have no pressure sensitivity or anything in it again ><
Hope this helps~

[Niah]

Oh sweet. Thank you so very much! I'm still deciding if I would just want them to do metallic for the yellow-gold or for all three colors (all my toys have some sort of metallic mixed in, so I rather like it). With Crackers having that matte printer texture all over, I'm worried he'd look too dull without a metallic effect to the whole toy (the ones I see on his page and on adopts look so dull without any bit of shiny added to them).

I had a pastel crackers that had a black base (it was split firmness too! and has a SC!) and a white shaft with purple marbled in and some metalic blue mixed in as a 3 way marble and it was LOVELY~ I'm not a big fan of metallics, but I think with the dark colors full metalics would be really nice! I was thinking that the gold would look good just being metallic itself, but after drawing this up i think full metalics would be nice!

Also sorry, my tablet drivers are all messed up and I have no pressure sensitivity or anything in it again ><
Hope this helps~

Thank you so very much! He's gorgeous. I'll definitely be attaching this to the ticket I send when I'm ready to order him (or, rather, when my bank account is ready for me to order him, lol).

[Kinky_Condesce]

(or, rather, when my bank account is ready for me to order him, lol).

That feel tho...

But you're very welcome :D
I'd love to see him when eventually gets made :D
I'm not one for dark or metallic colors myself, but damn this will turn out very pretty <3

[Niah]

(or, rather, when my bank account is ready for me to order him, lol).

That feel tho...

But you're very welcome :D
I'd love to see him when eventually gets made :D
I'm not one for dark or metallic colors myself, but damn this will turn out very pretty <3

I'll for sure post pics when I get around to having him made (it seriously might be months though...). I do hope he'll be very pretty, but I'm also slightly wary since BD has screwed up some people's customs. Their high demand right now makes me nervous. I'll also be ticketing them about my custom before I place my order.

[shrugslmao]

If someone wants something done, quote me and give me a character/hex codes/theme/pic/whatever and a model (or two) and tell me if you want something that just looks cool, or something that could actually be implemented into a toy.

If you're still doing this, can you maybe do like neapolitan ice cream colors (pink, off white, brown) with maybe a caramel or tan base and darker brown drips (like the slippy seconds affect), on really any base that you'd want? I'm thinking like ice cream with chocolate drizzle, but alas, I have no coloring program on my computer currently to pull this off.

[Kinky_Condesce]

If someone wants something done, quote me and give me a character/hex codes/theme/pic/whatever and a model (or two) and tell me if you want something that just looks cool, or something that could actually be implemented into a toy.

If you're still doing this, can you maybe do like neapolitan ice cream colors (pink, off white, brown) with maybe a caramel or tan base and darker brown drips (like the slippy seconds affect), on really any base that you'd want? I'm thinking like ice cream with chocolate drizzle, but alas, I have no coloring program on my computer currently to pull this off.

of course :D
Only fair warning, apparently BD doesn't do any color other than white for sloppy seconds on custom toys :<
(though some people have gotten it before, they usually say they will only do white)

Are there any specific models you are thinking of? I don't mind doing a few different ones. Ot a lot of different ones, lol

[shrugslmao]

If someone wants something done, quote me and give me a character/hex codes/theme/pic/whatever and a model (or two) and tell me if you want something that just looks cool, or something that could actually be implemented into a toy.

If you're still doing this, can you maybe do like neapolitan ice cream colors (pink, off white, brown) with maybe a caramel or tan base and darker brown drips (like the slippy seconds affect), on really any base that you'd want? I'm thinking like ice cream with chocolate drizzle, but alas, I have no coloring program on my computer currently to pull this off.

of course :D
Only fair warning, apparently BD doesn't do any color other than white for sloppy seconds on custom toys :<
(though some people have gotten it before, they usually say they will only do white)

Are there any specific models you are thinking of? I don't mind doing a few different ones. Ot a lot of different ones, lol

Yeah, I was just trying to think of something cool/cute.

Maybe a breeder? Maybe a Nox? Whatever you think, I guess.
Thanks again!

[Kinky_Condesce]

Yeah, I was just trying to think of something cool/cute.

Maybe a breeder? Maybe a Nox? Whatever you think, I guess.
Thanks again!

I really like how the Nox looks OwO
Also sorry, for whatever reason the pressure sensitivity in my tablet just up and left. I have to re install the drivers for my tablet like, once a week and I have no effing clue why!