Fantasy Toy Banter (Other non-BD Sites)

[Fae Fantase]

I've owned three toys in DA's medium (listed as ~8a) and two in BD's firm (8A), and I think that DA's approx. 8A tends to be a little less squishy in hand and slightly less flexible. Not a huge difference, but some. I'd say that DA's medium is more similar to TTC's firm than BD's, but maybe that's just me. Anyone else have thoughts? I mean, they're all pretty similar so I'm probably just splitting hairs. I'm guessing that the reason Sheep lists the shore as approximately 8A is because she's mixing 00-50 Ecoflex and 10A Dragon Skin? I could be wrong.

I'm unsure of the exact mixing Sheep does. My medium Lumpy's close to what my firm Chance's base was. I'd say they're real close to the same.

[AustinFetish]

At Damn Average, is 8 firm between BD's 5 and 8?

I'm going to order something tonight, possibly.


EDIT: I found the chart of firmness that Nevan posted on page 6 of the firmness comparison thread.

Just ordered a Taf in 8 from Damn Average. Off The Bone coloration. Now, for a Belphad in the same color..... I'll have to wait. She keeps selling out of Belphads quick.

I've owned three toys in DA's medium (listed as ~8a) and two in BD's firm (8A), and I think that DA's approx. 8A tends to be a little less squishy in hand and slightly less flexible. Not a huge difference, but some. I'd say that DA's medium is more similar to TTC's firm than BD's, but maybe that's just me. Anyone else have thoughts? I mean, they're all pretty similar so I'm probably just splitting hairs. I'm guessing that the reason Sheep lists the shore as approximately 8A is because she's mixing 00-50 Ecoflex and 10A Dragon Skin? I could be wrong.

I already bought it in 8, so....I'm sticking with that. Also, Taf has a midshaft of 6.5" girth with a base and head girth of 8 inches. So, I don't want it to bend easily or be floppy. 8" isn't near my girth limit, so I'm taking a gamble. I have seen someone say that their Taf was too soft and floppy mostly amplified by the design shape. I just can't remember what firmness they had, probably 003 - extra soft.

When I get a Belphad, it'll definitely be in 005.

[Drazard]

I already bought it in 8, so....I'm sticking with that. Also, Taf has a midshaft of 6.5" girth with a base and head girth of 8 inches. So, I don't want it to bend easily or be floppy. 8" isn't near my girth limit, so I'm taking a gamble. I have seen someone say that their Taf was too soft and floppy mostly amplified by the design shape. I just can't remember what firmness they had, probably 003 - extra soft.

When I get a Belphad, it'll definitely be in 005.

If it's any help, I've got a Taf in 8 and find it really easy to manage - no excessive flip flopping! I actually think the medium firmness helps to increase its presence and amplify its smooth textures as well. It's a great toy in-use - I hope you enjoy yours~

[AustinFetish]

I already bought it in 8, so....I'm sticking with that. Also, Taf has a midshaft of 6.5" girth with a base and head girth of 8 inches. So, I don't want it to bend easily or be floppy. 8" isn't near my girth limit, so I'm taking a gamble. I have seen someone say that their Taf was too soft and floppy mostly amplified by the design shape. I just can't remember what firmness they had, probably 003 - extra soft.

When I get a Belphad, it'll definitely be in 005.

If it's any help, I've got a Taf in 8 and find it really easy to manage - no excessive flip flopping! I actually think the medium firmness helps to increase its presence and amplify its smooth textures as well. It's a great toy in-use - I hope you enjoy yours~

Thank you so much for that feedback!

"increase its presence", I definitely like the sound of that!

[griffin-morgenstern]

Not really "fantasy" like, but I finally found an European based maker that makes human-like dildos AND have 0020-0030 firmness!
I'm always tired of seeing human like dildos with rock hard firmness, those have always been a bummer to me.
DeliZion is their shop name if someone is curious.

[Hoofs_N_Horns]

This Hati from PFF is simply amazing

Too bad it's a small



In other news XCA is starting to do "ejaculation ports" aka cum tubes

[Squirrelmunk]

Not really "fantasy" like, but I finally found an European based maker that makes human-like dildos AND have 0020-0030 firmness!
I'm always tired of seeing human like dildos with rock hard firmness, those have always been a bummer to me.
DeliZion is their shop name if someone is curious.

Where do they say what shore durometers they use?

[griffin-morgenstern]

Not really "fantasy" like, but I finally found an European based maker that makes human-like dildos AND have 0020-0030 firmness!
I'm always tired of seeing human like dildos with rock hard firmness, those have always been a bummer to me.
DeliZion is their shop name if someone is curious.

Where do they say what shore durometers they use?

I send them a message on Etsy, this was their reply:

"HI :)

The silicone we use is platinum cured. (hypoallergenic and without smell)

firmness:
00-30 (medium-hard) this one is like a erected penis.
00-20 (soft-medium) like a half erected penis.

Best regards :)"

[vixenvega]

Phoenix Flame has added large Skoll and large Hati to their line up

[L_eather]

Did anyone else order a mystery box from PFC? I'm really excited for mine, I can't wait for it to ship and get here.

[Villie]

Did anyone else order a mystery box from PFC? I'm really excited for mine, I can't wait for it to ship and get here.

I did!!! Still no shipping confirmation email yet, but I can't waaaait!!!

[WhiteWulfe]

Whoooooo, got shipping confirmation on my TwinTail Creations order!!! So can't wait to surprise hubby with his Small Mocha in Moonlit Monster as well as a full toolkit of CogRings, aaaaaand I really can't wait to see how that Small Alto in Corruption with a CumDrip turned out ^_^

As for PFC, definitely looking forward to ordering a medium Hati and medium Skoll in the soon-ish timeframe, because the dimensions just sound so wonderful. Love the thought of the larges, but I suspect that at the moment they'd be juuuust a tad too thick for me to take even the shaft ^_^;;;;

I also really want an inflatable from PH, but I suspect I should work on actually taking somewhat larger toys first before going that route ^_^;;;;;;;;;;;;;;;;;;

[FeistyPhoenix]

Did anyone else order a mystery box from PFC? I'm really excited for mine, I can't wait for it to ship and get here.

I did!!! Still no shipping confirmation email yet, but I can't waaaait!!!

I'm gonna work over the weekend to see if I can get some of these boxes out faster. Most of the boxes are like 80% assembled... the holdup is the gargoyles! Sorry about the slowness. I have one mold set for these little guys - not for lack of trying to make more molds, I just wrecked three sets of molds before I got one viable one and many hard lessons were learned (and fingers bruised)

[Tempest]

Phoenix Flame has added large Skoll and large Hati to their line up

Hnnnnnnnnng

XL is so close I can taste it

[QueenCheetah93]

Did anyone else order a mystery box from PFC? I'm really excited for mine, I can't wait for it to ship and get here.

I did!!! Still no shipping confirmation email yet, but I can't waaaait!!!

I'm gonna work over the weekend to see if I can get some of these boxes out faster. Most of the boxes are like 80% assembled... the holdup is the gargoyles! Sorry about the slowness. I have one mold set for these little guys - not for lack of trying to make more molds, I just wrecked three sets of molds before I got one viable one and many hard lessons were learned (and fingers bruised)

Wooo hype! Saw you added medium Elvia too! Might be back for one of those if my small goes over well!

[Chibity]

Rad drop at TTC is raaad! I also noticed that their stock images now have hover-over zoom in's, which is also pretty cool!

[Tempest]

Rad drop at TTC is raaad! I also noticed that their stock images now have hover-over zoom in's, which is also pretty cool!

That's a really cool pour! The fade is gorgeous, and I really like that striped two-tone base.

[Hoofs_N_Horns]

Love this aurora-like Mako that A Krow's Nest dropped! Not a shape I can use but they pour so many pretty toys

This one is gone already but there's another UV rainbow vomit one in the shop lol

[L_eather]

I'm gonna work over the weekend to see if I can get some of these boxes out faster. Most of the boxes are like 80% assembled... the holdup is the gargoyles! Sorry about the slowness. I have one mold set for these little guys - not for lack of trying to make more molds, I just wrecked three sets of molds before I got one viable one and many hard lessons were learned (and fingers bruised)

No worries!! You have a lot of Halloween orders I imagine. I'm just making a promise to myself not to order a medium Elvia until it arrives, ha.

[thesharkwhisperer]

Phoenix Flame has added large Skoll and large Hati to their line up

Omggg my funds cannot follow